Bathroom Remodel Cost Calculator (2026)
Estimate the cost of any bathroom renovation with zip-code accuracy, tailored to your needs. Use Remodelum to build an estimate, refine scope and track expenses. Zip code level accuracy.
Get started
Create a workspace to build your first estimate.
Tell us about the project and we'll build a ZIP-code accurate, category-by-category cost estimate. Takes under a minute.
Sample estimate No. RA-20261111-32257-B
Bathroom remodel estimate
A sample budget for remodeling a 60 sq ft full bathroom in a single-family home in Jacksonville, Florida, with mid-range finishes: a tiled walk-in shower with glass door, new vanity, toilet, tile floor, lighting, and exhaust fan, keeping the existing layout.
About $340 per sq ft, including contractor overhead and profit, permits, and a contingency for surprises.
- ZIP code
- 32257
- Location
- Jacksonville, FL
- Renovation
- Bathroom remodel
- Finish quality
- Mid-range
- Area
- 60 sq ft
Labor and Materials costs
$16,019Open any category to see its scope and how the cost is built: labor as hours × rate, materials as quantity × unit cost.
General conditions$1,695
Scope: Protection of the hallway and nearby rooms, dust control, debris hauling, cleanup, and on-site supervision for a 3-week project.
Demolition$820
Scope: Removal of the existing tub or shower, tile, vanity, toilet, and flooring down to the studs and subfloor in wet areas.
None. Debris disposal is included in General conditions.
Framing and carpentry$544
Scope: Blocking for grab bars, the vanity, and a shower niche, plus minor stud repairs.
Plumbing$3,220
Scope: New toilet, shower valve with handheld, vanity faucet, and shower drain, with supply and drain updates in the same locations.
Electrical$1,378
Scope: Vanity and shower lighting, a quiet exhaust fan with humidity sensor, and GFCI-protected outlets.
Insulation and drywall$772
Scope: Moisture-resistant drywall outside the shower, taped and finished.
Tile$3,628
Scope: Waterproofed walk-in shower with tiled walls and floor, plus a tile bathroom floor (about 140 sq ft).
Cabinetry and countertops$1,450
Scope: A 36-inch vanity with an integrated quartz top, and a mirrored medicine cabinet.
Finish carpentry and trim$2,062
Scope: Frameless glass shower door, baseboard and door casing, a new door lever, and bath accessories including a grab bar.
Painting$450
Scope: Walls, ceiling, trim, and door, with mildew-resistant bath paint.
Fees and contingency
$4,355Permits and fees$350
Scope: Plumbing and electrical permits and inspections for the City of Jacksonville.
Architecture and engineering—
Scope: Not needed: the fixtures stay in their current locations and no walls are moved.
No design or engineering fees for this scope.
Overhead and profit$2,403
Scope: The contractor's business overhead, insurance, project management, and profit.
Contingency$1,602
Scope: A reserve for hidden conditions found once walls and floors are opened, such as rotted subfloor around the toilet or tub, water-damaged studs, or old wiring.
Not included: moving the toilet, shower, or walls, a bathtub, heated floors, new windows, and towels or decor.
Analysis and assumptions
Hourly rates are typical 2026 billed rates for licensed trades in the Jacksonville area, which is close to the national average, and material prices are typical retail costs for mid-range products. The toilet, vanity, and shower stay in their current locations, which keeps plumbing work modest. Actual costs vary with the home's condition, your selections, and local contractor availability.
- Plan scope
- Track expenses
- Record payments
EXAMPLES OF BATHROOM RENOVATION COSTS2026 Average Bathroom Remodel Costs by Type
Average total investment ranges based on bathroom classification and finish quality.
| Bathroom Type | Low Tier | Mid Tier | High Tier |
|---|---|---|---|
| Half Bath / Powder Room | $5,000 | $10,000 | $20,000 |
| Full Bathroom (5×8) | $10,000 | $20,000 | $40,000 |
| Master Bathroom | $20,000 | $45,000 | $90,000+ |
| Small Bathroom (Under 40 sq ft) | $8,000 | $15,000 | $30,000 |
*Note: Projected ranges include labor and materials. Layout configurations that require relocating plumbing rough-ins, core structural changes, or specialized waterproofing systems will shift overall investment parameters toward the higher brackets.
HOW IT WORKS
How does Remodelum’s Estimator and Calculator work?
FACTORS IMPACTING BATHROOM RENOVATION COSTSWhat Moves the Price the Most in a Bathroom Remodel?
-
Tile selection spans a massive pricing spectrum. Standard ceramic or porcelain field tiles are highly economical, whereas premium natural stone, marble, or intricate mosaic patterns cost significantly more per square foot. Furthermore, complex layouts—such as floor-to-ceiling accent walls, herringbone patterns, or custom shower niches—substantially increase specialized labor installation fees.
-
The specification tier of your faucets, shower valves, vanities, and toilets directly swings tail-end expenses. Upgrading from standard retail-grade chrome plumbing hardware to premium solid-brass architectural lines, wall-mounted luxury configurations, or smart, high-efficiency toilets can easily add thousands of dollars to a material budget.
-
Keeping your existing layout intact keeps costs manageable. The moment you move a toilet across the room or swap a vanity location, a plumber must tear up floors and core through framing to relocate heavy main drain stacks, vent lines, and supply networks—rapidly escalating engineering and labor costs.
-
A standard drop-in acrylic bathtub setup is highly cost-effective to install. Converting that footprint into a luxury walk-in tile shower requires extensive mud-pan framing, multi-layer hot mop waterproofing, complex drainage slope engineering, and custom frameless glass enclosures, which represent a significant luxury investment.
-
Adding under-floor heating adds comfort but also shifts your upfront numbers. Installing hydronic or electric mesh floor warming requires specialized thermal mats, dedicated electrical sub-circuits to handle the load, programmable thermostats, and extra layer preparation before the final tile layout can be set down.
-
A basic "pull-and-replace" cosmetic remodel minimizes demolition labor. However, a gut remodel down to the bare wall studs frequently exposes hidden water damage, rotted subfloors from old pipe leaks, or un-level joists that require costly structural sistering and subfloor replacement before new plumbing and finishes can go in.
SMALL BATHROOM RENOVATION COSTS
Small Bathroom Remodel Cost
The overall footprint of a small bathroom (typically defined as under 40 to 50 square feet) keeps your total material volume lower, but the cost per square foot is often higher because specialized labor, waterproofing, and essential fixtures remain fixed expenses.
| Project Tier | Price Range | What It Covers |
|---|---|---|
| Cosmetic Refresh | $2,000 – $5,000 | Luxury vinyl plank (LVP) flooring overlay, fresh paint, pre-fabricated vanity, stock faucet, and upgraded lighting. Preserves the exact layout. |
| Mid-Range Update | $6,000 – $15,000 | Full pull-and-replace using standard retail materials. Porcelain tile floors/walls, premium stock or semi-custom vanity, quartz countertop, and standard tub or acrylic shower insert. |
| Custom Overhaul | $15,000 – $30,000+ | Full gut down to studs; spatial re-engineering. Custom cabinetry, natural stone or mosaic tiling, frameless glass shower enclosure, minor plumbing layout adjustments, and intelligent smart fixtures. |
MASTER BATHROOM REMODEL COSTS Master Bathroom Remodel Cost
Master bathroom renovations represent a significant investment due to their larger structural footprint, dual vanities, expansive tiling requirements, and a heavier emphasis on luxury or smart fixture configurations.
| Project Tier | Price Range | What It Covers |
|---|---|---|
| Basic / Cosmetic Refresh | $10,000 – $20,000 | Replacing old sheet vinyl or basic tile floors, upgrading dual vanities with pre-fabricated options, new hardware/faucets, paint, and updated lighting. No layout changes or major tile replacement. |
| Mid-Range Renovation | $25,000 – $45,000 | Full pull-and-replace footprint. Semi-custom double vanity with stone tops, matching porcelain floor and wall tile, brand-new standalone soaking tub, or upgraded tile shower with clear glass surround. |
| Luxury / Custom Overhaul | $50,000 – $90,000+ | Total layout re-engineering. Custom hardwood double vanity, premium marble or large-format tile, zero-threshold steam shower with body sprays, freestanding luxury tub, smart fixtures, and radiant in-floor heating. |
TYPES OF RENOVATIONS COVEREDOther Renovation Types covered by Remodelum
Whole House
Whole House Renovation Cost Estimator
Room-by-room estimate for complete home renovations, by ZIP code.
Kitchen
Kitchen Remodel Cost Estimator
Cabinets, countertops, appliances, and labor costs by ZIP code.
Home Addition
Home Addition Cost Estimator
Room additions, second stories, and garage conversions.
Patio
Patio Renovation Cost Estimator
Pavers, concrete, pergolas, and outdoor living spaces.
Basement
Basement Finishing Cost Estimator
Finishing, refinishing, improvement and basement conversion costs.
REMODEL BUDGET TRACKER
Use Remodelum to track your budget
FAQs
-
Costs range from $8,000 for a basic refresh to $60,000+ for a luxury remodel. Use our calculator for a precise estimate
-
Plumbing changes, high-end fixtures, and custom tilework typically increase costs significantly.
-
Yes—simple updates like new fixtures, paint, and stock vanities can modernize your bathroom without breaking the bank.
-
Our tool uses real-world pricing averages across the U.S. and lets you fine-tune your inputs for a personalized quote.
-
Yes! The bathroom estimator is 100% free and requires no sign-up.
-
Yes. Your estimate includes labor, materials, and even permit estimates for your ZIP code.