Whole House Renovation Cost Calculator & Estimator (2026)
Estimate the cost of any home renovation with zip-code accuracy, tailored to your needs. Use Remodelum to build an estimate, refine scope and track expenses. Zip code level accuracy.
Get started
Create a workspace to build your first estimate.
Tell us about the project and we'll build a ZIP-code accurate, category-by-category cost estimate. Takes under a minute.
Sample estimate No. RA-20261111-32257
Whole-house remodel estimate
A sample budget for updating a 2,000 sq ft single-family home in Jacksonville, Florida, with mid-range finishes: a new kitchen, two remodeled bathrooms, new flooring and paint throughout, and a new HVAC system.
About $69 per sq ft, including contractor overhead and profit, permits, and a contingency for surprises.
- ZIP code
- 32257
- Location
- Jacksonville, FL
- Renovation
- Whole-house remodel
- Finish quality
- Mid-range
- Area
- 2,000 sq ft
Labor and Materials costs
$110,160Open any category to see its scope and how the cost is built: labor as hours × rate, materials as quantity × unit cost.
General conditions$8,230
Scope: Site protection, dumpsters, cleanup, and on-site supervision for an 8-week project.
Demolition$4,000
Scope: Removal of the kitchen, two bathrooms, carpet and old flooring, and dated finishes.
None. Debris disposal is included in General conditions.
Framing and carpentry$2,488
Scope: Minor framing repairs, blocking for cabinets and grab bars, and rough-opening adjustments.
Plumbing$9,880
Scope: New kitchen and bath fixtures, shower valves, and supply and drain updates where walls are open.
Electrical$8,372
Scope: Updated kitchen circuits, new lighting and devices, and bath exhaust fans.
HVAC$10,970
Scope: Replacement of the central heat pump with a new 4-ton high-efficiency system and thermostat.
Insulation and drywall$4,326
Scope: Insulation and new drywall where the kitchen and baths are opened, taped and finished.
Tile$8,700
Scope: Two bathroom floors and shower walls with waterproofing, plus a kitchen backsplash (about 340 sq ft).
Flooring$11,849
Scope: Mid-range luxury vinyl plank in the living areas and bedrooms (about 1,650 sq ft).
Cabinetry and countertops$18,315
Scope: New kitchen cabinets with quartz countertops, plus two bathroom vanities.
Finish carpentry and trim$7,910
Scope: New baseboards and casing, interior doors and hardware, shower glass, and bath accessories.
Painting$9,500
Scope: Walls, ceilings, trim, and doors throughout, with primer and two finish coats.
Appliances$5,620
Scope: Mid-range kitchen package: refrigerator, range, dishwasher, and microwave hood.
Fees and contingency
$27,737Permits and fees$2,400
Scope: Building, plumbing, electrical, and mechanical permits and inspections for the City of Jacksonville.
Architecture and engineering—
Scope: Not needed: the layout stays the same and no structural changes are planned.
No design or engineering fees for this scope.
Overhead and profit$16,524
Scope: The contractor's business overhead, insurance, project management, and profit.
Contingency$8,813
Scope: A reserve for hidden conditions found once walls and floors are opened, such as rot, old wiring, or uneven subfloors.
Not included: roof replacement, siding and windows, structural or layout changes, landscaping, furniture, and laundry appliances.
Analysis and assumptions
Hourly rates are typical 2026 billed rates for licensed trades in the Jacksonville area, which is close to the national average, and material prices are typical retail costs for mid-range products. The plumbing and electrical systems are assumed to be in working order, so they are updated where walls are opened rather than fully replaced. Actual costs vary with the home's condition, your selections, and local contractor availability.
- Plan scope
- Track expenses
- Record payments
HOW IT WORKS
How does Remodelum’s Estimator and Calculator work?
HOW TO CREATE YOUR RENOVATION COST CALCULATIONCreate your Home Renovation Cost Calculation in minutes
-
Leverage our AI estimator to get an accurate home renovation cost broken down by category
-
Fine tune your costs by adjusting your scope - Will you move the kitchen, patch the roof, rewire the walls?
-
Compare contractor quotes side-by-side. Identify gaps, find savings opportunities
-
Keep your renovation costs under control and renovate with confidence
COST DIFFERENCES BY ZIPCODESample whole House remodel Costs per zip-code
-
$225-$350/ sqft
-
~$210-$325/ sqft
-
~$150-$240/ sqft
-
~$135-$210 /sqft
Average Whole House Renovation Cost - Updated with 2026 data
EXAMPLES OF RENOVATION COSTS BY SQFT| Project Size | Basic Tier | Mid-Range Tier | High-End/Luxury |
|---|---|---|---|
| Small (< 1,500 sq ft) | $150 – $225 / sq ft | $225 – $350 / sq ft | $350 – $500+ / sq ft |
| Medium (1,500 – 3,000 sq ft) | $135 – $200 / sq ft | $200 – $315 / sq ft | $315 – $450+ / sq ft |
| Large (3,000+ sq ft) | $120 – $185 / sq ft | $185 – $285 / sq ft | $285 – $400+ / sq ft |
*Note: Cost ranges reflect localized 2026 data models including historical brownstone requirements, utility upgrades, and local architectural parameters. Scale economies apply to raw volume, while complex layouts or structural vacancy periods push pricing toward higher boundaries.
RENOVATION TYPES
Other renovation types supported
Planning a specific room rather than a whole-house renovation? Use one of Remodelum's dedicated cost estimators:
Kitchen
Kitchen Remodel Cost Estimator
Cabinets, countertops, appliances, and labor costs — by ZIP code.
Bathroom
Bathroom Remodel Cost Estimator
Half bath, full bath, and master bath cost breakdowns.
Home Addition
Home Addition Cost Estimator
Room additions, second stories, and garage conversions.
Patio
Patio Renovation Cost Estimator
Pavers, concrete, pergolas, and outdoor living spaces.
Basement
Basement Finishing Cost Estimator
Finishing, refinishing, improvement, and basement conversion costs.
REMODEL BUDGET TRACKER
Use Remodelum to track your budget
FAQs
-
Renovating the whole house at once is typically more cost-efficient, since shared costs like permits, dumpster rental, and contractor mobilization are spread across the full project instead of repeated per room. It also avoids re-doing finished work later. If your budget or timeline requires phasing, our room-specific estimators (kitchen, bathroom, basement, and more) let you plan each phase individually.
-
A whole house estimate combines every major system and room: structural and framing, roofing and exterior, electrical and plumbing, kitchen, bathrooms, flooring throughout, and finishes. You can adjust scope and finish quality for each area independently within the single estimate.
-
A full gut renovation involves removing structures down to the studs and rebuilding systems like electrical and plumbing, typically costing $150–$400+ per square foot. A whole-house refresh — updating finishes, fixtures, paint, and flooring without structural changes — typically runs $50–$150 per square foot. Select your scope in the estimator to see which range applies to your project.
-
A whole house renovation typically takes 4 to 9 months depending on scope, home size, and whether structural or systems work is involved. Cosmetic-only whole-house refreshes can often be completed in 2 to 4 months.
-
Yes. Remodelum converts your whole house estimate directly into a working budget, so you can compare contractor quotes and track costs across every room and system as your renovation progresses.